An old Shake ’n’ Take project: Conclusion

This series of posts describes a freight car build that originated as a so-called “Shake ‘n’ Take” kitbashing project at the 2015 meeting of Prototype Rails in Cocoa Beach, Florida. Previous posts in the series gave the prototype background, links to project directions, replacement of original car body ends, and addition of details. In the previous post, Part 3, the model had been given a coat of Tamiya primer (see that preceding post at: https://modelingthesp.blogspot.com/2024/10/an-old-shake-n-take-project-part-3.html ).

As stated in that previous post, the model was now ready for its final paint coat, and that was applied. The model was also removed from its “paint shop” trucks and give the correct ones that it will operate with. In this condition, it’s shown below. 

Next came application of decals. A very nice decal set for this car was assembled by Steve Hile, and the lettering elements were all well arranged and complete. I enjoy this part of a freight car project, when the model assumes its identity as an individual car. Once all decals were in place, the car was given a coat of clear flat.

Next, the car needed to be weathered. I used my tried and true method of washes made from acrylic tube paints (see the “Reference pages” linked at the top right corner of the present post). Then, after another protective coat of clear flat, I added route cards and a few chalk marks. Here is the completed model.

Incidentally, the black paint patch under the right-hand door is the service stencil for the air brake reservoir (and was only on this side of the car). The black sill patch toward the right of the car side is a repacking stencil, applied on both sides. You can click on the image to enlarge it if you wish.

Just for comparison, here is the prototype photo I relied on in carrying out the project. You will note the same paint patches that were applied to the model, are visible here too, and were the reason they were applied to the model. (Chet McCoid photo, San Diego, Dec. 26, 1954, Bob’s Photo collection)

Finally, I want to wrap this up with an image of the heading for the project directions, appropriately crediting Richard Hendrickson for the original idea of the conversion, along with Greg Martin’s management and Schuyler Larrabee’s editing. Thanks, guys.

This concludes work on my 2015 Shake ‘n’ Take project from Cocoa  Beach that year. As always, an interesting project with some learning aspects, and a distinctive freight car as the product.

Tony Thompson