Some readers will remember that when I built my layout town of Santa Rosalia, I ended up with a pretty short tail track for switching the industries at the front of the layout. I had no real choice at the time, as the wall of the room was an immovable object. You can see this is the “plan view” below. The wall of the room is at right.
From the three-way switch at lower left, the tail track is just the length of a 40-foot car and a single locomotive, such as the Southern Pacific Consolidation usually assigned to the local on this branch. Even a 50-foot car would not be workable here, if destined to the industries along the track at lower left.
Here is a level view, showing how the area looks, with the door frame to the right.
More than once, during operating sessions, visiting operators have said, “Hey, this is simple to fix, just bore through the wall.” There is an adjoining room to the right, which was the kitchen when the layout space was a small apartment. Usually I laughed off the suggestion. But over time, I did think about doing it, and what I could accomplish on the other side of the wall.
On the other side is the kitchen counter, with shelves above. On that counter, right next to the wall in question, is a microwave oven. The track could indeed be brought through the wall and extended across the top of the microwave.
For some time, I had had thoughts of not only the extended tail track in the kitchen, but also of adding a new industrial spur, such as perhaps a shipyard. I have long had a casting of an industrial building, which I envisioned as a possible shipyard building on the extension of the branch trackage. It’s shown below on top of the microwave.
Completely coincidentally, the top of the microwave oven is almost exactly at the level of the track board on the other side of the wall. I attempted to photograph that, with the door partly open (and evident edge-on in the photograph below). You can see the two levels on each side. So there is a definite possibility that an extension through the wall could work.
Just recently, I happened to look at it with a fresh eye, and thought that maybe I should consider the idea further. But my son, who does a lot of construction, checked the wall and determined that the door framing is double at this location, and that the track might not quite clear that framing. That could require some serious modifications to this doorway framing as part of a simple track extension.
Not wanting to undertake all that, I decided to stand down. It’s too bad in a way, losing my vision of a shipyard industry to switch, along with the extended tail track, but no dice. Wish there was a happier outcome to report, but not on this one. The wall will remain whole.
Tony Thompson
Take out the kitchen
ReplyDeleteI sure the wife was happy no going into the kitchen.
ReplyDeleteI guess I wasn't clear. The layout room was built years ago, and often used, as a rental apartment, thus having a kitchen and bathroom. I have chosen to use it only as a layout room. So the kitchen has never been used as such by me, and in fact my spray booth covers the sink. Some future wife might be grateful there is no hole in the wall, but not nowadays.
DeleteTony Thompson