Kit appreciation: Speedwitch 50-foot NP box car

 I have written a number of kit appreciation posts for freight car kits that I have especially enjoyed. This one is about a Speedwitch Media kit for a Northern Pacific 50-foot single-sheathed automobile car, kit K103. 

The prototype is a group of 1000 cars purchased by NP in 1926, the first 500 from Pressed Steel Car Co. (cars 5000–5499) and 500 more from Standard Steel Car Co. (cars 5500–5999). They had a ten-foot, six-inch door opening, 5-5-5 Murphy corrugated steel ends, and a traditional NP radial roof. Below is a builder photo (Haskell & Barker, Smithsonian Institution neg. 5073, Richard Hendrickson collection). The fishbelly underframe is evident.

The NP monad on the door was only applied to cars from Standard Steel Car. Note NP’s typical lettering of the 1920s, with reporting marks, number and capacity data to the right of the door. In the 1930s, NP would revise its lettering to conform to ARA standard locations. By the late 1940s, the monad was no longer applied to these cars, and the word “automobile” was omitted as well. 

By January of 1953, my modeling year, there were 935 of these cars still in service. Here is a 1954 photo taken on the Embarcadero at San Francisco (Wilbur C. Whittaker).

An interesting detail of these cars, barely visible in the builder view above, was the application of the Miner “Ideal” lever-type handbrake. It is shown more clearly in a photo of the model (taken from kit directions). Here you can also see the lumber door, applied only to this end.

In building the car, I chose to apply AB brakes, as would be appropriate for my modeling year. These were retrofitted to these cars in the early and mid-1940s. Here’s a view of the completed and painted underframe. The train line was omitted. 

Here’s a photo of the completed model, showing the car lettering and number matching the Whittaker photo above. 

/

 The roof is nicely rendered as shown here, along with the corrugated ends. 

This model is a nice re-creation of a distinctive freight car. It often runs in my layout operating sessions, both in mainline trains and for local switching on my branch line. I enjoy seeing it at work.

Tony Thompson