This now-substantial series of posts is intended to provide examples of the great variety of formats and appearances of prototype route cards, the small tags of light cardstock affixed to freight cars to indicate switching work. They were attached to small tack boards, which were 5.5 x 9 inches in size (see this post: https://modelingthesp.blogspot.com/2011/12/route-cards-6.html ). You can find previous posts on the subject by using “Route cards” as the search term in the search box at right.
Today I want to begin with something rarely seen: blank route cards. Since these have been rarely used in railroading for some time now, it’s an unusual condition. These were provided to me by Richard Townsend, who mentioned that they are used as scratch paper at the Cumbres & Toltec Railroad.
The two shown below are interesting to me in that they don’t have identical lines to fill out. The one at left, for westbound shipments, is simpler than the one at right, for connection to the Rock Island eastward. Both are 4 x 5 inches in size.
Next I want to turn to still more examples from the vast array of these cards collected by Michael Litant. Below is a Burlington form, directing a car to be transferred to the D&RG; it must be an old form, predating adoption of the D&RGW mark. The car is SP 176476, a Class B-50-28 box car modified with a 10-foot door and a broad yellow stripe diagonally across the door, signifying assignment to lumber and plywood loading. It’s destined to Eugene, Oregon, and is thus likely an empty returning for loading. I don’t know what the “XB” notation means. It’s 3 x 4 inches.
An additional example of a transfer card is this one from the Cotton Belt, being a transfer to the Nickel Plate, evidently at St. Louis (the large “AS” on the card likely means Alton & Southern, an East St. Louis belt line owned by Cotton Belt). The car is presumably a Cotton Belt car, abbreviated as SW, thus SSW 46322, a 40-foot double-door box car, with a cargo of plywood. Note that it’s identified as “car 18,” presumably the 18th car in a cut. The card is 3.5 inches square and obviously was attached with a staple.
A fourth example, again showing the use of cards that simply identify an outgoing train or perhaps even a track for intermediate switching, comes from the Atlantic Coast Line. In very light handwriting, at the top is noted UP 164194, a 50-foot steel box car with double 8-foot doors, and at the bottom is the load, which seems to say “paper.” The card is 3.5 inches square and has a single nail hole.
Next is a Union Pacific card, with the legend “West End” in large letters, probably a local train. The car is NYC 177867, a 50-foot steel box car with a single 8-foot door, and the contents were “OK Starch.” The card must have been placed at Ogden, near the location of Thiokol Chemical’s plant, specifically Building 10. This card is 4 x 5 inches.
Finally, an Illinois Central card, either at or destined to IC’s yard in Memphis. The car was IC 17935, a 40-foot wood-sheathed box car, and the cargo, lumber. Time of card appears to be 3 PM on the 19th of whatever months it was. The card is 4 inches square.
As I always mention, I continue to find these cards interesting, both as artifacts, and as insights into railroad communication back before so much became digital.
Tony Thompson
No comments:
Post a Comment