My state highway facility

Among the many industries in my layout town of Ballard is a facility of the California Division of Highways, predecessor of today’s CalTrans. I chose this regional facility in part to be able to receive cement cargoes in covered hoppers. In the year I model, 1953, covered hoppers were almost entirely used for bulk cement. Many of their cargoes, familiar in later years, such as dry chemicals, grain, animal feed, and so forth, were mostly in the future in 1953. 

The cement loads are appropriate because in 1953, the Division of Highways continued to build and maintain many secondary roads and bridges in the state. The advent of freeways after 1940, usually enormous projects, had made contractors essential in major works, but local roads and highways were still the responsibility of the Division of Highways. Thus inbound cargoes of both cement and asphalt are appropriate, along with all kinds of supplies like fence and sign posts, rebar, bridge girders, lumber for concrete forms, and so on. 

I built the structure from a Rix Pikestuff kit (intended as an auto repair garage), a simple styrene kit that went together easily. It represents a cinder-block building with steel-framed windows. As I built it, it has a 3.5 x 7-inch footprint. I went online and researched the geographic districts of the Division of Highways in 1953, and found that the Central Coast area I model was in District 5.

As stated above, my primary motivation for including this industry was inbound cement loads. So the classic view you would have of this industry in most of my operating sessions is as below. That’s Nipomo Street at left.

In addition to the cement loads and other highway materials mentioned above, occasionally some work equipment may arrive. In the photo below, it’s a road grader. 

In creating waybills for this destination, I knew that cement, a heavy and not particularly expensive commodity, ordinarily does not travel far from  origin. It is easy online to research what cement plants existed in California in 1953, and I show a partial list below. I’ve omitted a few, such as the Calaveras Cement plant at San Andreas, on SP’s Kentucky House branch.

One feature of the list above is that one of the plants, Southwestern Portland Cement, was located on the Santa Fe. This provides a reason for inbound Santa Fe freight cars on my layout. Given the often-fierce rivalry between SP and Santa Fe, empty Santa Fe cars would effectively never be loaded on the SP, but of course inbound loads could well travel in them.

For waybills, there is nothing exotic about the ones for this industry. I show an example below. And in addition to the occasional Santa Fe covered hopper with such loads, I can also use T&NO, SSW, and UP cars, all of which would be available in California for loading at the plants above. 

This industry, like a number that are on my layout, was chose specifically for the loads it would receive, and has worked well in that capacity.

Tony Thompson