Sunday, April 23, 2017

The new Broadway Limited tank cars

As is common with freight car projects which involve assembly in China, the announcement by Broadway Limited of new 6000-gallon high-pressure tank car models in HO scale appeared some time back. Then, as is also common, the announced arrival time was moved back a couple of times. But they are now here, and believe you me, the wait was worth it. I received the four cars I had wanted, via a dealer who broke up the inconvenient “four-packs” in which Broadway chose to market the cars.
     These are beautiful models and are certain to be warmly received by knowledgeable modelers. We finally have a high-pressure tank car other than an LPG car with a correct-size valve bonnet and dome platform. (Incidentally, the dome platforms are floored in wooden planks, as was standard practice until steel grid was required for new construction, starting in 1948; retrofitting of older platforms was not required.)
     One thing to recognize with the cars is that the capacity in gallons is not marked on the car ends of the models that were produced with multiple car numbers. The gallonage marking was usual though not required. Clerks could readily look up the actual capacity in the Tank Car Capacities Tariff, which I have reviewed previously (see my post describing how to obtain it, at: http://modelingthesp.blogspot.com/2016/12/the-tank-car-tariff.html ), I will give examples below.
     Perhaps Broadway omitted end gallon markings on the multiple-number models because each one should have been different! A car I received produced in a single number does have the end gallonage marked — and the Tariff shows it’s the correct value. One might think that the need to print different end numbers on the multiple-number models could have included printing the different gallonages. In any case, modelers who care can add decals for the end markings.
     Here is one of the cars I chose. The well-known chemical concern Penn Salt (the Pennsylvania Salt Manufacturing Company) had a subsidiary in Washington state, called Penn Salt of Washington, located at Tacoma, and with separate reporting marks TELX (maybe for Tacoma ELectrochemical). The capacity of this car, TELX 224, was 5849 gallons, as listed in the Tariff.


And here is a closer-up view of the very nicely done valve bonnet and planked platform:


     Two of the cars I chose were the Columbia Chemicals and  Columbia-Southern cars. The background and history of these company names was summarized in an earlier blog post (you can read that post at this link: http://modelingthesp.blogspot.com/2012/07/thomas-industries-tank-cars-update.html ). In brief, in 1899 Pittsburgh Plate Glass established a subsidiary, Columbia Chemical, to make soda ash, a component in glass-making. The soda ash process also had chlorine as a by-product, so Columbia sold both. In 1931, Pittsburgh Plate Glass or PPG formed another company, Southern Alkali Corporation, as a joint venture with American Cyanamid (in 1951 PPG acquired all of Southern Alkali). Around that same time, PPG combined its Columbia and Southern Alkali subsidiaries as Columbia-Southern. (In later years, that company would become a component of the Chemicals Division of PPG.)
     Both Columbia and Southern Alkali had owned tank cars to move their chlorine to market. The Columbia cars used the predictable reporting marks, PPGX, while Southern Alkali cars were initialed SACX. After the two companies were merged, it appears from Official Railway Equipment Registers that cars retained their original reporting marks, and the respective rosters did not change much over time, indicating little effort at re-initialing the SACX cars. Instead, most of the PPGX cars appear to have been disposed of, particularly their numerous, older 40-ton cars. By 1958 the Columbia-Southern roster was dominated by the SACX mark.
     The Broadway Limited models mirror the above history. As an example, here is SACX 680, the Tariff capacity of which was 5927 gallons:


Another beautiful model, with superb lettering and the same excellent details.
     I look forward to waybilling these cars and including them in future operating sessions. Broadway Limited has provided a very much needed model for those of us who like tank cars.
Tony Thompson

5 comments:

  1. Tony, not that you would know but I'll ask anyway... would papermaking plants in the Florida area have received Chlorine and caustic soda from TX as opposed from the NE or Midwest? trying to justify routing Southern Alkali tanks over the Tallahassee Sub of SAL' s "west end" Thinking that the large pulp mills at Jacksonville, FL and Fernandina would have received this type of traffic. any thoughts...

    ReplyDelete
  2. May depend on era. After Southern Alkali and Columbia combined in 1951, there was considerable production from Lake Charles, LA, and that could certainly have gone to Florida. Moreover, products like chlorine were subject to price variations, and a large buyer like a paper plant might shop widely for the best price. But no, I don't specifically know about north Florida.
    Tony Thompson
    Tony Thompson

    ReplyDelete
  3. Terry Link (in the Toronto area) broke up a set and sold me two done up for C-I-L. I've few quibbles with these, other than the overthickness of the running boards and the trucks. These cars were built by Canadian Car and Foundry with Type Y trucks. Kadee PRR 2F D2 trucks are close to the Type Y's.

    Steve Lucas

    ReplyDelete
  4. I am reminded of something Richard Hendrickson used to say often, that what is called "ready to run" is really "ready to correct and finish." He very frequently changed trucks and other details on RTR cars.
    Tony Thompson

    ReplyDelete
  5. Tony, thanks for the review. Would you know the appropriate era for the Penn Salt car in that paint scheme? I'm also interested in the Hooker chlorine tanks as I model the Pacific Northwest in 1965, and am having trouble finding photos or guides to era appropriate paint schemes for the two Tacoma chlorine plants.

    ReplyDelete